Skip to content
Please note that our office will be closed Good Friday 29th March and Easter Monday the 1st April.
Please note that our office will be closed Good Friday 29th March and Easter Monday the 1st April.

Wood Wick - No 2 - 7mmW x 150mmL

$6.75
  • Burns Clean
  • Has Excellent Hot Throw
  • No Wick Trimming between burn cycles
  • Is Manufacturing Friendly
  • High Tolerance to Wax Formulation Variations
  • Extinguishes quickly

We recommend using two wicks to achieve the ideal flame size for a particular application. Two wicks will increase the liquid wax supply for combustion. Mixing 2 different wick widths is also a great way of achieving the ideal performance, as it allows you to fine tune the wick sizing.

More info click here >>>>

  • How to manufacture candles using Wood Wicks
    • Pour wax over top of wood when filling container to provide fuel for first burn.
    • Wood wicks burn the best when the candle is manufactured with a flat top.
    • Wood wicks work best when candle is completely cool before burning.
    • When manufacturing a candle it is best to have 6mm of wood above the wax to start.
    • You may use 1 wood wick or, if the flame is too small, 2 wood wicks.
    • For 2 wicks you may use any combination of sizes.
    • The first wood wick creates the burn pool the second controls the flame size.
    • Use a paper clip or similar device to hold 2 wicks together until wax is cooled.
    • No wick trimming necessary
  •  Basic suggested wood wick guide for containers

    45mm Dia. 2 x No2 wicks or 1 x No3
    60mm Dia. 2 x No3 wicks or 1 x No4
    75mm Dia. 2 x No4 wicks or 1 x No5
    80mm Dia. 2 x No5 wicks or 1 x No6

    For 2 wicks you can use any combination of sizes

    All suggestions are only starting points for your test burning Research & Development. All candle wick selections must be thoroughly test burned from start of life to end of life for safest evaluation. There is no substitute for thorough test burning due to the many unpredictable natural variations in all of the components and formulas possible in candle manufacturing. CS accepts no liability or responsibility in their customer’s wick selection. It is solely the responsibility of CS customers to choose the correct wick for their candle.

SKU EG0101
  • Burns Clean
  • Has Excellent Hot Throw
  • No Wick Trimming between burn cycles
  • Is Manufacturing Friendly
  • High Tolerance to Wax Formulation Variations
  • Extinguishes quickly

We recommend using two wicks to achieve the ideal flame size for a particular application. Two wicks will increase the liquid wax supply for combustion. Mixing 2 different wick widths is also a great way of achieving the ideal performance, as it allows you to fine tune the wick sizing.

Register for back in stock notifications

For [productTitle] [variantTitle]
Opt-in for marketing newsletters. Privacy policy.

Thank you for your interest in this product. We will let you know as soon as this becomes available.

An error occured while processing your request, please try again later.

You have already subscribed to this product.

This product has a maximum order limit of <qty>. Please contact <phone> or email as at <email> for bulk orders

Please call [phone] to obtain a bulk shipping quote

403

Access Denied

You do not have permission to view this page

Please contact customerservice@candlesupply.com.au for assistance or refresh the page to retry. If you are using a VPN please disable it.

ES,CZ,IR,UA,PL,RU
none
none
154.95.36.199,45.94.47.66,45.87.249.143,185.199.228.220,45.13.184.226,45.13.184.148
none
candle-supply-nz-dev.myshopify.com